| 1 |
Comparative impact of acidified glycerol pretreatment on the thermal degradation kinetics of crude wheat straw for potential sustainable valorization |
Hamayoun Mahmood, Ali Raza, Muhammad Raashid, Atif Khan, Saqib Mahmood |
Netherlands |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2025 |
| 2 |
Advanced oxidative degradation of mono-ethanolamine in water using ultraviolet light and hydrogen peroxide |
Atif Khan, Saima Yasin, Hamayoun Mahmood, Shabana Afzal,Tanveer Iqbal |
RSC Advances |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2024 |
| 3 |
Mono‑ethanolamine breakdown by UV/hydrogen peroxide via MEA photolysis: kinetics, energy rate/order and degradation efciency for mono‑ethanolamine wastewater treatment |
Atif Khan, Saima Yasin, Hamayoun Mahmood, Tanveer Iqbal |
Brazilian Journal of Chemical Engineering |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2024 |
| 4 |
Synthesis of cyclic carbonates from CO2 cycloaddition to bio-based epoxides and glycerol: an overview of recent development |
Valentine C. Eze and Adam Harvey Muhammad Usman, Abdul Rehman, Faisal Saleem, Aumber Abbas |
United kingdom |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2023 |
| 5 |
A comprehensive review of the methane decomposition using a gliding arc discharge reactor for hydrogen generation |
Atif Khan, Muhammad Rashid,Abdul Rehman,Faisal Saleem,Salman Raza Naqvi,Shabana Afzal,Umair.Y.Qazi,Waqar Ahmad,Iftikhar Nisar Butt,Khalid Mahmood |
United Kingdom |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2023 |
| 6 |
Effect of non-thermal plasma dielectric barrier discharge reactor on the quality of biomass gasification product gas from the gasifier |
Faisal Saleem a,b,*, Asif Hussain Khoja c, Atif Khan b, Abdul Rehman b, Salman Raza Naqvi d, Umair Yaqub Qazi e, Kui Zhang a, Adam Harvey a |
Journal of the Energy Institute |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2023 |
| 7 |
A comprehensive review of the methane decomposition using gliding arc discharge reactor for hydrogen generation |
Atif Khan, Muhammad Rashid,Abdul Rehman,Faisal Saleem,Salman Raza Naqvi,Shabana Afzal,Umair.Y.Qazi,Waqar Ahmad,Iftikhar Nisar Butt,Khalid Mahmood |
Journal of the Energy Institute |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2023 |
| 8 |
Prediction of single salt rejection in PES/CMS based membranes |
Danial Qadir, Alamin Idris, Rizwan Nasir, Hafiz Abdul Mannan, Rabia Sharif, Hilmi Mukhtar |
United Kingdom |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2023 |
| 9 |
Bipolar Junction Transistor Exhibiting Excellent Output Characteristics with a Prompt Response against the Selective Protein |
1 |
Germany |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2022 |
| 10 |
Precise and Prompt Analyte Detection via Ordered Orientation of Receptor in WSe2-based Field Effect Transistor. |
1 |
Switzerland |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2022 |
| 11 |
Methane decomposition for hydrogen production: A comprehensive review on catalyst selection and reactor systems |
Jehangeer Raza, Asif Hussain Khoja, Mustafa Anwar, Faisal Saleem, Salman Raza Naqvi, Rabia Liaquat, Muhammad Hassan, Rahat Javaid, Umair Yaqub Qazi, Brock Lumbers |
Renewable and Sustainable Energy Reviews |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2022 |
| 12 |
A Stereoselective Route to R-(+)-Limonene-Based Non-isocyanate Poly (hydroxyurethanes) |
Abdul Rehman, Elena Russell, Faisal Saleem, Khalid Mahmood, Aumber Abbas, Valentine C Eze, Adam Harvey |
Journal of Polymers and the Environment |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2022 |
| 13 |
Biolubricant production from castor oil using iron oxide nanoparticles as an additive: Experimental, modelling and tribological assessment |
Dagmar Juchelková. Uzair Ahmad, Salman Raza Naqvi, Imtiaz Ali, Faisal Saleem, MuhammadTaqi Mehrana, Umair Sikandar |
Fuel |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2022 |
| 14 |
Oxidative removal of hexane from the gas stream by dielectric barrier discharge reactor and effect of gas environment |
Usman H Dahiru, Faisal Saleem, Farah Talib Al-sudani, Kui Zhang, Adam P Harvey |
Chemical Engineering and Processing-Process Intensification |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2022 |
| 15 |
Decomposition of benzene vapour using non-thermal plasmas: The effect of moisture content on eliminating solid residue |
Usman H Dahiru, Faisal Saleem, Farah Talib Al-sudani, Kui Zhang, Adam P Harvey |
Journal of Environmental Chemical Engineering |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2022 |
| 16 |
Decomposition of benzene as a biomass gasification tar in CH4 carrier gas using non-thermal plasma: Parametric and kinetic study |
Faisal Saleem, Aumber Abbas, Abdul Rehman, Asif Hussain Khoja, Salman Raza Naqvi, Muhammad Yousaf Arshad, Kui Zhang, Adam Harvey |
Journal of the Energy Institute |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2022 |
| 17 |
Plasma-assisted removal of methanol in N 2, dry and humidified air using a dielectric barrier discharge (DBD) reactor |
Usman H Dahiru, Faisal Saleem, Kui Zhang, Adam Harvey |
RSC Advances |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2022 |
| 18 |
Synthesis of Bio-Based Non-Fluorinated Oil and Water Repellent Finishes for Cotton Fabric by Using Palmitic Acid, Succinic Acid, and Maleic Acid |
Rabia Sharif, Muhammad Mohsin, Naveed Ramzan, Shaheen Sardar, Wardah Anam |
USA |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2022 |
| 19 |
Solution processed high performance perovskite solar cells based on a silver nanowire-titanium dioxide hybrid top electrode |
Khalid Mahmood, Hafiz Husnanin Akhtar, Haji Ghulam Qutab, Naveed Ramzan, Rabia Sharif, Abdul Rehman, Arshi Khalid, Muhamma Taqi Mehran |
United Kingdom |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2022 |
| 20 |
An empirical study regarding the environment sustainability practices in the textile industry |
Shaheen sardar, Muhammad Mohsin, Muhammad Saad Memon, Baber Ramzan, Rabia Sharif |
Romania |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2022 |
| 21 |
Development of free fluorine and formaldehyde oil and water repellent finishes for cotton fabrics through polymerization of bio-based stearic acid with carboxylic acids |
Rabia Sharif, Muhammad Mohsin, Naveed Ramzan, Syed Waqas Ahmad, Haji Ghulam Qutab |
Romania |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2022 |
| 22 |
Removal of benzene as a tar model compound from a gas mixture using non-thermal plasma dielectric barrier discharge reactor |
Faisal Saleem, Asif Hussain Khoja, Jamal Umer, Farhan Ahmad, Syed Zaheer Abbase, Kui Zhanga, Adam Harveya |
Journal of the Energy Institute |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2021 |
| 23 |
A comparison of the decomposition of biomass gasification tar compound in CO, CO2, H2 and N2 carrier gases using non-thermal plasma |
Faisal Saleem, Abdul Rehman, Aumber Abbas, Asif Hussain Khoja, Farhan Ahmad, Lina Liu ,Kui Zhanga, Adam Harvey |
Journal of the Energy Institute |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2021 |
| 24 |
Recent developments in catalyst synthesis using DBD plasma for reforming applications |
Asif Hussain Khoja, Arslan Mazhara, Faisal Saleem, Muhammad Taqi Mehran, Salman Raza Naqvi, Mustafa Anwar, Sehar Shakir ,Nor Aishah Saidina Amine ,Muhammad Bilal Sajid |
International Journal of Hydrogen Energy |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2021 |
| 25 |
Biomass ash characterization, fusion analysis and its application in catalytic decomposition of methane |
Muhammad Assad Munawar, Asif Hussain Khoja, Muhammad Hassan, Rabia Liaquat ,Salman Raza Naqvi, Muhammad Taqi Mehran, Ali Abdullah, Faisal Saleem |
Fuel |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2021 |
| 26 |
Synthesis of trans-limonene bis-epoxide by stereoselective epoxidation of (R)-(+)-limonene |
Abdul Rehman,Elena Russell, Faisal Saleem, Farhan Javed, Sajjad Ahmad, Valentine C.Ezea, Adam Harvey |
Journal of Environmental Chemical Engineering |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2021 |
| 27 |
Removal of cyclohexane as a toxic pollutant from air using a non-thermal plasma: Influence of different parameters |
Usman H.Dahiru, Faisal Saleem,Kui Zhang, Adam P.Harvey |
Journal of Environmental Chemical Engineering |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2021 |
| 28 |
Kinetic study for styrene carbonate synthesis via CO2 cycloaddition to styrene oxide using silica-supported pyrrolidinopyridinium iodide catalyst |
Abdul Rehman, Faisal Saleem, Farhan Javed, H.G Qutab, Valentine C. Ezea, Adam Harvey |
Journal of CO2 Utilization |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2021 |
| 29 |
Recent Advances in Molten-Carbonate Membranes for Carbon Dioxide Separation: Focus on Material Selection, Geometry, and Surface Modification |
Shabana Afzal, Atif Khan |
The Scientific World Journal, Egypt |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2021 |
| 30 |
Partial oxidation of methane over CeO2 loaded hydrotalcite (MgNiAl) catalyst for the production of hydrogen rich syngas (H2, CO) |
Muhammad Anees Ul Hasnain, Asif Hussain Khoja, Faaz Ahmed Butt, Mariam Ayesha, Faisal Saleem, Muhammad Taqi Mehran, Rabia Liaquat, Majid Ali, Zaki Ismail Zaki |
International Journal of Hydrogen Energy |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2021 |
| 31 |
Development of reduced graphene oxide from biowaste as an electrode material for vanadium redox flow battery |
Aumber Abbas, Xue Er Eng, Nicholas Ee, Faisal Saleem, Dan Wu, Wenqian Chen, Murni Handayani, Tanveer A Tabish, Nyunt Wai, Tuti Mariana Lim |
Journal of Energy Storage |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2021 |
| 32 |
Multiwall carbon nanotubes derived from plastic packaging waste as a high‐performance electrode material for supercapacitors |
Aumber Abbas, Yap Mei Yi, Faisal Saleem, Zhao Jin, Andrei Veksha, Qingyu Yan, Grzegorz Lisak, Tuti Mariana Lim |
International Journal of Energy Research |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2021 |
| 33 |
Removal of toluene as a toxic VOC from methane gas using a non-thermal plasma dielectric barrier discharge reactor |
Faisal Saleem, Abdul Rehman, Farhan Ahmad, Asif Hussain Khoja, Farhan Javed, Kui Zhang, Adam Harvey |
RSC Advances |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2021 |
| 34 |
Non-thermal plasma as a promising route for the removal of tar from the product gas of biomass gasification – A critical review |
Faisal Saleem, Jack Harris, Kui Zhang, Adam Harvey |
Chemical Engineering Journal |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2020 |
| 35 |
Hydrogen Production from Methane Cracking in Dielectric Barrier Discharge Catalytic Plasma Reactor Using a Nanocatalyst |
Asif Hussain Khoja, Abul Kalam Azad, Faisal Saleem,Bilal Alam Khan, Salman Raza Naqvi, Muhammad Taqi Mehran, Nor Aishah Saidina Amine |
energies |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2020 |
| 36 |
Treatment of methylene blue in aqueous solution by electrocoagulation/ micro-crystalline cellulosic adsorption combined process |
Noshaba Noreena, Mohsin Kazmib,c, Nadeem Ferozea, Farhan Javedd,*, Haji Ghulam Qutabd, Hafiz Muhammad Shahzad Munira |
United States |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2020 |
| 37 |
Enzymatic extraction of potato starch: A parametric optimization study using response surface methodology |
Madsar Hameed1, Syed W. Ahmad1, Sajjad Ahmad2*, Haji G. Qutab1, Muhammad Dasih1, Muhammad Imran1 |
Polish |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2020 |
| 38 |
Enzymatic extraction of potato starch: A parametric optimization study using response surface methodology. |
Hameed, M., Ahmad, S. W., Ahmad, S., Qutab, H. G., Dasih, M., & Imran, M. |
Poland |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2020 |
| 39 |
Numerical Simulation of Hydrodynamics in a Turbulent Contact Absorber: A Simplified Approach. |
Imran, M., Ullah, A., Ahmad, S. W., Qutab, H. G., & Hameed, M. |
Saudi Arabia |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2020 |
| 40 |
Role of perovskites as a bi‐functional catalyst for electrochemical water splitting: A review |
Ramsha Khan, Muhammad T Mehran, Salman R Naqvi, Asif H Khoja, Khalid Mahmood, Faisal Shahzad, Sajjad Hussain |
International Journal of Energy Research |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2020 |
| 41 |
Numerical Simulation of hydrodynamics in a turbulent contact absorber: A simplified approach |
M. Imran, A. Ullah, S.W. Ahmad, H.G. Quatab, M. Hameed |
Arabian Journal for Science & Technology |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2020 |
| 42 |
Effect of turbulence modeling on hydrodynamics of a turbulent contact absorber |
Atta Ullah, Amna Amanat, Muhammad Imran, Syed Shah Jehan Gillani, Mustafa Kilic, Afrasyab Khan |
Switzerland |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2020 |
| 43 |
Effect of Methane as an Additive in the Product Gas toward the Formation of Lower Hydrocarbons during the Decomposition of a Tar Analogue |
Faisal Saleem, Jamal Umer, Abdul Rehman, , Kui Zhang, Adam Harvey |
energy & fuels |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2019 |
| 44 |
Methane conversion to H2 and higher hydrocarbons using non-thermal plasma dielectric barrier discharge reactor |
Faisal Saleem,Usman H.Dahiru, Kui Zhang, Adam P.Harvey |
Chemical Engineering and Processing - Process Intensification |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2019 |
| 45 |
Low temperature conversion of toluene to methane using dielectric barrier discharge reactor |
Faisal Saleem, Kui Zhang, Adam Harvey |
Fuel |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2019 |
| 46 |
Decomposition of benzene as a tar analogue in CO2 and H2 carrier gases, using a non-thermal plasma |
Faisal Saleem,Kui Zhang, Adam P.Harvey |
Chemical Engineering Journal |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2019 |
| 47 |
Direct conversion of benzene as a tar analogue to methane using non-thermal plasma |
Faisal Saleem, Kui Zhang, Adam Harvey |
Energy & Fuels |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2019 |
| 48 |
Temperature Effects on Adsorption Rate for Azo Dye Removal From Textile Waste Water Using Activated Bentonite Clay |
Atif Khan,Syed Hassan Javed Naqvi, Shabana Afzal, Faisal Rehman, Abdul Rehman |
Nust Journal of Engineering Sciences Pakistan |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2019 |
| 49 |
Temperature dependence of non-thermal plasma assisted hydrocracking of toluene to lower hydrocarbons in a dielectric barrier discharge reactor |
Faisal Saleem, Kui Zhang, Adam Harvey |
Chemical Engineering Journal |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2019 |
| 50 |
Plasma-assisted decomposition of a biomass gasification tar analogue into lower hydrocarbons in a synthetic product gas using a dielectric barrier discharge reactor |
Faisal Saleem, Kui Zhang, Adam Harvey |
Fuel |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2019 |
| 51 |
Novel 3D hierarchically structured cauliflower-shaped SnO 2 nanospheres as effective photoelectrodes in hybrid photovoltaics. Nanoscale Advances |
Mahmood, K., Imran, M., Hameed, M., Rehman, F., Ahmad, S. W., & Nawaz, F. |
China |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2019 |
| 52 |
Solution-processed barium hydroxide modified boron-doped ZnO bilayer electron transporting materials: toward stable perovskite solar cells with high efficiency of over 20.5% |
Faisal Rehman, Khalid Mahmood, Arshi Khalid, Muhammad Shahzad Zafar, Madsar Hameed |
Journal of colloid & interface science |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2019 |
| 53 |
Novel 3D hierarchically structured cauliflower-shaped SnO 2 nanospheres as effective photoelectrodes in hybrid photovoltaics |
Khalid Mahmood, Muhammad Imran, Madsar Hameed, Faisal Rehman, Syed Waqas Ahmad, Faisal Nawaz |
Nanoscale Advances |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2019 |
| 54 |
Co-axial electrospray: a versatile tool to fabricate hybrid electron transporting materials for high efficiency and stable perovskite photovoltaics |
Madsar Hameed, Khalid Mahmood, Muhammad Imran, Faisal Nawaz, Muhammad Taqi Mehran |
Nanoscale Advances |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2019 |
| 55 |
Eradication of Chromium (VI) from waste water through ion exchange technique; kinetics and scale up studies |
S.W. Ahmad, M.S. Zafar , S. Ahmad, M. Zia-ul-Haq, M. Ashraf , J. Rabbani ,S. Ullah |
Environmental Protection Engineering |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2019 |
| 56 |
Removal of Toluene as a Tar Analogue in a N2 Carrier Gas Using a Non-thermal Plasma Dielectric Barrier Discharge Reactor |
Faisal Saleem, Kui Zhang, Adam Harvey |
Energy & Fuels |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2018 |
| 57 |
Role of CO2 in the Conversion of Toluene as a Tar Surrogate in a Nonthermal Plasma Dielectric Barrier Discharge Reactor |
Faisal Saleem, Kui Zhang, Adam Harvey |
Energy & Fuels |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2018 |
| 58 |
Electrosprayed polymer-hybridized multidoped ZnO mesoscopic nanocrystals yield highly efficient and stable perovskite solar cells |
Khalid Mahmood, Muhammad Taqi Mehran, Faisal Rehman, Muhammad Shahzad Zafar, Syed Waqas Ahmad, Rak-Hyun Song |
ACS Omega |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2018 |
| 59 |
Removal of residual carcinogenic dyes from industrial waste water using flocculation technique |
M.S. Zafar, S.W. Ahmad, M. Zia-ul-Haq, A. Mubeen, W.A. Khan |
Chemical Industry & Chemical Engineering Quarterly |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2018 |
| 60 |
Parametric optimization of coal desulfurization through Alkaline leaching |
F. Rehman, S.W. Ahmad, M.S. Zafar, S. Ahmad, M. Zia-Ul-Haq |
Polish Journal of Chemical Technology |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2018 |
| 61 |
Adsorption of Mordant Red 73 dye on acid activated bentonite: Kinetics and thermodynamic study |
Syed Hassan Javed, Abdul Zahir, Atif Khan, Shabana Afzal, Muhammad Mansha |
Journal of Molecular Liquids, Elsevier |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2018 |
| 62 |
Data article for adsorption of chemically activated fuller's earth and rice husk for removal of dri-marine reactive red dye |
Atif Khan, Shabana Afzal, Haseeb Mustafa, Minahil Qumreen |
Data in Brief, Elsevier |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2018 |
| 63 |
Feasibility study of power generation from different renewable resources in Pakistan: Review |
Atif Khan, Syed Hassan Javed Naqvi, Shabana Afzal, Zohaib Ashraf, Sana Zahid |
Pakistan Journal of Scientific and Industrial Research PCSIR |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2018 |
| 64 |
Efficiency Enhancement of Banana Peel for Waste Water Treatment through Chemical Adsorption |
Atif Khan*, Hassan Javed Naqvi, Shabana Afzal, Shaista Jabeen, Misbah Iqbal, and Iram Riaz |
Pakistan Academy of Sciences |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2017 |
| 65 |
Current status of electron transport layers in perovskite solar cells: materials and properties |
Khalid Mahmood, Saad Sarwar, Muhammad Taqi Mehran |
RSC Advances |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2017 |
| 66 |
Effect of filler type and composition on the mechanical, thermal and dynamic mechanical properties of PS/SBR vulcanizate |
H. Anjum, S.W. Ahmad, R. Sharif, M. Tausif |
Journal of Polymer Engineering |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2016 |
| 67 |
Parametric optimization of rice bran oil extraction using response surface mythology |
S.W. Ahmad, F. Javed, S. Ahmad, M. Akram, A. Rehman |
Polish Journal of Chemical Technology |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2016 |
| 68 |
Surface, structural and mechanical properties of zirconium ablated by KrF laser radiation |
N. Ali, S. Bashir, U. Kalsoom, N. Begum, S.W. Ahmad |
Quantum Electronics |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2016 |
| 69 |
Clean Hydrogen Energy and Electric Power Production with CO2 Capturing by Using Coal Gasification |
Raheel Ahmad, Iqra Saleem |
Iran |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2016 |
| 70 |
Surface activation of Fuller's Earth using organic acids |
Atif Khan, Hassan Javed Naqvi, Mohsin Ali Kazmi, Zohaib Ashraf |
Science International Lahore |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 71 |
FT-IR technique for identification for adulteration in milk |
Zohaib Ashraf, Hassan Javed Naqvi, Atif Khan, Sobia Noureen |
Science International Lahore |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 72 |
Ni (II) REMOVAL BY BIO-SORPTION USING THE COCONUT HUSK |
Shahbaz Ahmad, Mohsin Ali Kazmi, Nadeem Feroze, Atif Khan, Zohaib Ashraf |
Science International Lahore |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 73 |
Economic Feasibility of Biomass Gasification for Electricity generation in Pakistan |
Atif Khan |
Global Journal of Science and Frontier Resarch |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 74 |
Bleaching of Vegetable oil Using organic acid activated fuller's earth (bentonite clay) |
Atif Khan |
International Journal of Scientific and Engineering Research |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 75 |
Feasibility Study of Municipal Plastic Waste for Power Generation in Lahore City, Pakistan |
Atif Khan, Khizar Nawaz, Muhammad Usama, Zohaib Ashraf |
Journal of Chemical Engineering and Process Technology |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 76 |
Investigation of the parameters on the fast pyrolysis of wheat straw for production of bio-oil |
Syed Kamal Zafar, Hasan Javed Naqvi, Atif Khan |
American Journal of Engineering Research |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 77 |
Heavy oil hydroprocessing: effect of nanostructured morphologies of MoS2 as catalyst |
Saira Bano, Syed Waqas Ahmad, Seong Ihl Woo, Faisal Saleem |
Reaction Kinetics, Mechanisms and Catalysis |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 78 |
Extraction of starch from potato by enzymatic process |
Hameed, M., Malik, S. R., Iqbal, M. F., & Mehmood, M. |
Pakistan |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 79 |
Alignment of nanoparticles, nanorods, and nanowires during chemical vapor deposition of silicon |
Bhabani Sankar Swain, Jin-Woo Park, Seung-Min Yang, Khalid Mahmood, Bibhu Prasad Swain, Jae-Gab Lee, Nong-Moon Hwang |
Applied Physics A |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 80 |
16.1% efficient hysteresis‐free mesostructured perovskite solar cells based on synergistically improved ZnO nanorod arrays |
Khalid Mahmood, Bhabani Sankar Swain, Aram Amassian |
Advanced Energy Materials |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 81 |
Simulation of circulating fluidized bed gasification for characteristics study of Pakistani coal |
N. Ramzan, M. Athar, S. Begum, S.W. Ahmad and S. Naveed |
Polish Journal of Chemical Technology |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 82 |
Highly Efficient Hybrid Photovoltaics Based on Hyperbranched Three‐Dimensional TiO2 Electron Transporting Materials |
Khalid Mahmood, Bhabani Sankar Swain, Aram Amassian |
Advanced Materials |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 83 |
Structural and optical properties of H 2 diluted c-Si/a-SiO x core-shell silicon nanowire |
Bhabani Sankar Swain, Bibhu Prasad Swain, Khalid Mahmood, Seung-Min Yang, Nong-Moon Hwang |
Applied Physics A |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 84 |
Core–shell heterostructured metal oxide arrays enable superior light-harvesting and hysteresis-free mesoscopic perovskite solar cells |
Khalid Mahmood, Bhabani Sankar Swain, Aram Amassian |
Nanoscale |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 85 |
Retarding charge recombination in perovskite solar cells using ultrathin MgO-coated TiO 2 nanoparticulate films |
Gill Sang Han, Hyun Suk Chung, Byeong Jo Kim, Dong Hoe Kim, Jin Wook Lee, Bhabani Sankar Swain, Khalid Mahmood, Jin Sun Yoo, Nam-Gyu Park, Jung Heon Lee, Hyun Suk Jung |
JMC A |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 86 |
Highly efficient perovskite solar cells based on a nanostructured WO 3–TiO 2 core–shell electron transporting material |
Khalid Mahmood, Bhabani S Swain, Ahmad R Kirmani, Aram Amassian |
JMC A |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 87 |
Highly efficient and bending durable perovskite solar cells: toward a wearable power source |
Byeong Jo Kim, Dong Hoe Kim, Yoo-Yong Lee, Hee-Won Shin, Gill Sang Han, Jung Sug Hong, Khalid Mahmood, Tae Kyu Ahn, Young-Chang Joo, Kug Sun Hong, Nam-Gyu Park, Sangwook Lee, Hyun Suk Jung |
Energy & Environmental Science |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 88 |
Production of Environment-Friendly Acid Gas Waste Stream from a Coal Gasification Plant |
Iqra Saleem, Raheel Ahmad and Saira Bano |
Pakistan |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 89 |
Effect of filler type and composition on the mechanical, thermal, and dynamic mechanical properties of PS/SBR vulcanizate |
Hirra Anjum, Syed Waqas Ahmad, Rabia Sharif, Muhammad Tausif |
Germany |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2015 |
| 90 |
Pool boiling on modified surfaces |
S. W. Ahmad, J.S. Lewis, R.J.M. Glen |
Heat Transfer Engineering |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2014 |
| 91 |
Effect of infusion time and temperature on decaffeination of tea using liquid-liquid extraction technique |
R. Sharif, S.W. Ahmad, H. Anjum, N. Ramzan and S.R. Malik |
Journal of Food Process Engineering |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2014 |
| 92 |
A dye-sensitized solar cell based on a boron-doped ZnO (BZO) film with double light-scattering-layers structured photoanode |
Khalid Mahmood, Hyung Jin Sung |
JMC A |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2014 |
| 93 |
Study on the enhanced and stable field emission behavior of a novel electrosprayed Al-doped ZnO bilayer film |
Khalid Mahmood, Rahim Munir, Bhabani Sankar Swain, Gill-Sang Han, Byeong-Jo Kim, Hyun Suk Jung |
RSC Advances |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2014 |
| 94 |
Double-layered ZnO nanostructures for efficient perovskite solar cells |
Khalid Mahmood, Bhabani Sankar Swain, Aram Amassian |
Nanoscale |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2014 |
| 95 |
Controlling the surface nanostructure of ZnO and Al-doped ZnO thin films using electrostatic spraying for their application in 12% efficient perovskite solar cells |
Khalid Mahmood, Bhabani Sankar Swain, Hyun Suk Jung |
Nanoscale |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2014 |
| 96 |
Perfomance enhancement of fire retardant finish with environmental friendly bio-cross linker for cotton |
M. Mohsin, S.W. Ahmad, A. Khatri and B. Zahid |
Journal for cleaner Production |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2013 |
| 97 |
Removal of phenol from wastewater using activated waste tea leaves |
M. Kazmi, A.R. Saleemi, N. Ferooze, A. Yaqoob and S.W. Ahmad |
Polish Journal of Chemical Technology |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2013 |
| 98 |
Growth and conductivity enhancement of N-doped ZnO nanorod arrays |
Khalid Mahmood, Seung Bin Park |
Journal of crystal Growth |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2012 |
| 99 |
Compound effect of EHD and surface roughness in pool boiling and CHF |
S. W. Ahmad, T.G. Karayiannis, D.B.R. Kenning and A. Luke |
Applied Thermal Engineering |
Chemical, Polymer and Composite Materials Engineering (FSD Campus) |
2011 |